160 Wheeled mucking machine
Brief description: Tire belt type mucking machine (slag raking machine) is mainly used for mining operations with narrow space, such as metal mines, water diversion tunnels, etc. Its function is to collect gravel and soil materials from various projects, transport and load them.
Product Description
Brief description: Tire belt type mucking machine (slag raking machine) is mainly used for mining operations with narrow space, such as metal mines, water diversion tunnels, etc. Its function is to collect gravel and soil materials from various projects, transport and load them. The machine relies on tires to shovel rocks and shovel the rocks into its own belt conveyor through the bucket. The conveyor unloads the rocks from the tail into dump trucks, mine carts or other loading equipment. At the same time, the backhoe digging arm can be used to pick up distant rocks, and the bucket can also be used to clean the working surface.
It is suitable for roadways with a cross-section of 4.5 × 4.5 meters or more. The whole machine is driven by four wheels . The work efficiency of a 160 -type slag raking machine can replace multiple labor . It is a good helper for mining
ZWY-160 series large tire belt conveyor mucking machine is suitable for mines, bridges and culverts, diversion tunnels and other cross-sections ≥ 4 × 4 meters, can be equipped with large transport vehicles, the size of the car box ( length 4000mm × height 2200mm ) about, slag extraction efficiency High, equipped with high-strength wear-resistant and flame-retardant conveyor belt, bandwidth 1000mm , belt speed up to 0.8 m / s, high conveying efficiency, far exceeding the conveying speed of scraper by 0.4 to 0.6 m / s, and the loading efficiency is increased by 30 ~ About 50 %. The large tire-type belt conveyor slag raking machine adopts high and low two-speed walking design, which can change the work site and climb the slope cheaply. The transition speed can reach 5.0 kilometers per hour, which saves the transition time. The belt conveyor is driven by a high-torque hydraulic motor, which can be started with load (filled with slag), shortening the loading time. Avoid the disadvantages of starting the electric drum due to unstable working voltage (voltage lower than 380V ) and starting with load (full of slag).
Technical Parameters
Loading capacity m³/h | ≥ 160 | |
Whole machine quality kg | 4900±5% | |
Use section m | 4*4 meters or more | |
Feeding size mm | 650*900 | |
Turning radius m | ≥10 | |
Ground clearance mm | 300 | |
Digging width (C) mm | 4500 | |
Digging height (D) mm | 2900 | |
Digging distance (E) mm | 2400 | |
Unloading height mm | 2300 | |
Loading length mm | 3500 | |
Digging depth (F) mm | 600 | |
Gradeability (°) | ≤15 | |
Belt conveying speed m/s | 0.8±5% | |
Total power of the whole machine KW | 37 | |
Walking speed m/s | 4.7±5% | |
Opening pressure of safety valve MPa | 16.5 | |
Rated working pressure MPa | 16 | |
Electrical insulation | Three phase MΩ | >1.5 |
Phase to phase MΩ | >1.5 | |
Dimensions | Length mm | 9000 |
Width (H) mm | 2350 | |
Height mm | 1850 | |