News

260 Water Well Drilling Rig Machine

October 26 , 2024

Features of UY260 water well drilling rig: 1. The chassis of the drilling rig adopts a professional walking motor with a reduction gearbox, which has a longer service life; 2. The gearbox is integrated and has dual motors, which has stronger power, greater torque, more durability and low maintenance cost; 3. It adopts a professional excavator chassis, which is sturdy and durable, has a large load-bearing capacity, a wide chain plate, and less damage to hard roads; 4. Each hydraulic oil pipe is covered with a thickened protective sleeve to extend the service life of the oil pipe; 5. Dual systems can be added: 1. Air power system with air compressor 2. Mud pump system with mud pump; Main parameters of UY260 water well drilling rig Model: UY260 with steel crawler Depth: 300m Diameter: 100-360mm ( 4-12inches) Diesel engine: 74 KW Cummins

Learn More >

How do I know if I can dig a well?

October 16 , 2024

If you are embarking on drilling a well on your own, The first question you need to confirm before you start digging is to decide where is the best place to drill is? Underlying Geology: Before drilling, it is important to confirm the underlying geology of the land. In most cases, the land should be suitable for drilling and producing water. However, if the ground is mostly made up of rock, the ground may not be porous enough to allow water to flow. Surface Waters: When building a well that is near-surface water (streams, rivers and ponds) it is important to keep in mind that these waters may contain biological, agricultural, or industrial contamination and should be considered before placing a well in the area. Flooded Areas: Avoid flooded areas, as accessibility and contamination may be a factor. Waste: Avoid latrines and other places where human and animal waste is concentrated. This helps prevent the introduction of disease-causing pathogens from entering the well water. Industrial Facilities: Avoid places near industrial facilities or garbage dumps. These areas may produce harmful chemical discharge into the soil and groundwater. Proximity To Other Wells: Put enough distance between wells that are close in proximity...

Learn More >

Maintenance and care of hydraulic system for Drill Rig machine

October 16 , 2024

Proper use and maintenance of hydraulic system is the most important work in the use of full hydraulic drilling rigs, and is an important guarantee for the normal operation and extended service life of full hydraulic drilling rigs. 1. Precautions for installing oil pipes in hydraulic system: (1) The oil suction pipe should not leak, and each joint should be tight and well sealed; (2) A filter should be installed on the oil suction pipe; (3) The return oil pipe should be inserted below the oil level of the oil tank to prevent splashing foam and mixing with air; (4) The leaking oil in the electromagnetic reversing valve must be equipped with a separate return oil pipe to prevent back pressure when the oil is leaking back and avoid hindering the movement of the valve core; (5) The return oil port of the overflow valve is not allowed to be connected to the inlet of the hydraulic pump; (6) All pipelines should be installed twice, the first test installation and the second formal installation. After the test installation, remove the oil pipe, pickle it with 20% sulfuric acid or hydraulic acid solution, then neutralize it with 10% soda water, and...

Learn More >

How can I get my well to produce more water?

September 24 , 2024

How can I get my well to produce more water? Drill Deeper. If your well is otherwise properly set up, drilling several feet deeper may improve the yield. Shock and Clean. Add a Storage Tank. Add a Secondary Well. Reduce Your Water Use.

Learn More >

Maintenance for Rock Blasting Drill Rig

September 23 , 2024

Blasting rigs are heavy equipment used in industries such as oil, gas and mining. They are very complex to use and require frequent maintenance. Here are a few things to pay attention to when maintaining blasting rigs: 1. Regularly check and replace lubricating oil and filter elements: The hydraulic system and equipment in the blasting rig need to regularly replace lubricating oil and filter elements to maintain their normal operation and extend their service life. 2. Cleaning and rust prevention: Dust, mud and other debris will accumulate during the use of the blasting rig, and the surface and related parts should be cleaned regularly. In addition, attention should be paid to rust prevention of steel structure components to prevent corrosion and damage. 3. Check and maintain the electrical system: The electrical system of the blasting rig includes motors, cables, electronic control devices, etc., which should be regularly inspected and maintained, including finding problems such as leakage and burning of wires, and repairing or replacing faulty parts in a timely manner. 4. Check and adjust the hydraulic system: The hydraulic system of the blasting rig is a key component. It is necessary to regularly check the oil quality, oil level and...

Learn More >

UYX Full Hydraulic Core Exploration Drill Rig

September 23 , 2024

The UYX Full Hydraulic Core Exploration Drill Rig is launched by Zhengzhou UNIQUE Group and is a high-performance drilling equipment. It is suitable for obtaining underground material samples, such as solid mineral deposit exploration, engineering geological survey, oil, natural gas and groundwater drilling. The drilling rig can operate efficiently in various terrains and has excellent stability and reliability. Main features Crawler chassis: equipped with wireless remote control crawler chassis, which can adapt to various complex terrains and ensure safety during operation. Frame: The welded structure frame provides excellent stability and drilling rigidity. Slide: Using hot-rolled carbon channel steel and square steel, the oil cylinder controls smooth lifting and lowering to ensure the accuracy of drilling. Drilling tower: equipped with a ground-touching base to enhance drilling stability and improve drilling results. Rotating mechanism: mechanical two-speed plus stepless speed regulation design, advanced structure ensures flexibility and efficiency during drilling. Propulsion mechanism: oil cylinder chain double speed feeding mechanism, stable and reliable operation. Hydraulic clamp: simplifies the clamping and disassembly process of drill pipe and improves work efficiency. Hydraulic winch: can flexibly lift drilling tools or auxiliary tools to increase the convenience of operation. Hydraulic legs: four hydraulic legs can be quickly leveled...

Learn More >